Silly question 4

[Onorio]

Hi,

I have an Primary Server R.9.1 with a Sip Trunk.
I am installing a IPO500 V2 as Expansion Server just to add Digital Expansion Modules and digital extensions.
The Sip Trunk is in the Primary Server and my question is how I manage to allow the digital phones of the Expansion Server to make calls through the Sip Trunk of the Primary Server.
If I create a short code in the Expansion Server and select the function DIAL it doesn't recognize the line of the Sip Trunk (because it is created in the Primary Server).
How do I manage to allow the digital phones use the Sip Trunk of the Primary Server to make calls?

I appreciate your answers

 

[Onorio]

If anybody has the same doubt and is interested in the same question the answer is in this guide:

http://www.devconnectprogram.com/fileMedia/download/848362a9-8f99-41bb-8175-e5723b9fa3c1

 

[AACon]

You need to send your digits across the h323. I don't like how they did it in that doc, and it doesn't look right.
A 9N/N pointed to an ARS of ?/. would send just the N, not a 9 N. I would just make a shortcode of 9N/Dial/9N/H323GroupID on the expansion. Replace h323groupid of the outgoing group ID of the h323 trunk.
The primary server would then get 9N inbound, which would match it's shortcode, and then send it out the SIP trunk so long as that is properly configured.

-Austin
ACE: Implement IP Office