Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Signalling Server telnet console messages

Status
Not open for further replies.
absinthium

absinthium

IS-IT--Management
Aug 28, 2003
104
AU
Hi all,
Is there anyway to stop all the LOG and QOS messages from displaying on the terminal when using telnet to a signalling server?

I have a script that runs on prints some commands but the messages that spit out on screen are interrupting the data flow and it fails.

If I could suppress messages on the terminal then this would solve my problem.

Thanks,
 
Status
Not open for further replies.

Similar threads

Michael OConnor
  • Locked
  • Question
M1250 vs M2250 Console
Replies
4
Views
163
Michael OConnor
Michael OConnor
brison
  • Locked
  • Question
Teltronics SEB console access
Replies
2
Views
135
brison
brison
John Tel
  • Locked
  • Question
CS1K Signaling Server partition full /dev/hda10 (Not the normal /var issue). Directory not working.
Replies
4
Views
339
John Tel
John Tel
Mokpokpo Agbovon
  • Question
Replace M2250 Consoles with 3904 Digital Sets
Replies
5
Views
237
gbtac3
gbtac3
MoJHK
  • Locked
  • Question
M2250 console handset volume was low
Replies
1
Views
119
quirko
quirko

Part and Inventory Search

Sponsor

Back
Top