oneeyebrow
Technical User
Can someone let me know how to access the command line interface on a Signalling Server.
Thanks in advance.
Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Signalling Server CLI
- Thread starter oneeyebrow
- Start date
- Status
intelligentium
Vendor
You can either telnet or ssh (if higher releases) to the Sigserver IP. You would get an "OAM>" prompt.
Kinda depends on the release. You can either use ssh or direct connect to the SS. But the login is different in different releases. If you are using UCM then the SS will take on that login and password. If it's prior to 6.0 then you would use the PBX login and password.
- Status
Similar threads
- Locked
- Question
- Locked
- Question