Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Siemens hipath pbx.how to surpress trunk group name on cornet calls
- Thread starter techinu
- Start date
Iamnothere
Technical User
Never attempted to do this, but here are some suggestions. Just remember that I have no idea if any of these will work for your specific scenario:
AMO COT: SUPN (Suppress Name)
Add this entry to your Cornet COT and see if it helps. If not, remove it.
AMO COP: NONA (Do not send Name)
Add this entry to your Cornet COP. If it does not work, remove it.
LAST CHOICE:
AMO ZAND: see parameters DISPTGNA and DISPMODE
(Remember that ZAND parameters affect SYSTEM-WIDE settings!!!!)
Please re-post so others can learn from your pain.
Good luck
AMO COT: SUPN (Suppress Name)
Add this entry to your Cornet COT and see if it helps. If not, remove it.
AMO COP: NONA (Do not send Name)
Add this entry to your Cornet COP. If it does not work, remove it.
LAST CHOICE:
AMO ZAND: see parameters DISPTGNA and DISPMODE
(Remember that ZAND parameters affect SYSTEM-WIDE settings!!!!)
Please re-post so others can learn from your pain.
Good luck
- Status