Hi everyone. I'm new here and I tried to find similar thread but I didn't find it so here is new thread. 
So, we have HiPath 4000 in our company. With old version everything worked fine. We are using S and SL dect phones, and also C590 because this model have software from S series.
Problem comes after upgrade to v5. This C590 dect phones doesn't have identification. Guy from Siemens told us that it can't be solved and that we must buy S/SL series dect phones which costs more than 100e, and C590 costs about 45e.
This C590 phones are working normaly, we have just that problem with identification. More than half phones are C590, normaly we buy them because they are more than 50% cheaper from S/SL series phones.
Does anyone knows how we can make C590 to have identification?
PS> Sorry for my bad english.
Best regards
So, we have HiPath 4000 in our company. With old version everything worked fine. We are using S and SL dect phones, and also C590 because this model have software from S series.
Problem comes after upgrade to v5. This C590 dect phones doesn't have identification. Guy from Siemens told us that it can't be solved and that we must buy S/SL series dect phones which costs more than 100e, and C590 costs about 45e.
This C590 phones are working normaly, we have just that problem with identification. More than half phones are C590, normaly we buy them because they are more than 50% cheaper from S/SL series phones.
Does anyone knows how we can make C590 to have identification?
PS> Sorry for my bad english.
Best regards