Siemens Hipath 4000 V2 V3, V4, V5, and V6 list AMOS Teil Regen ?? 2

[sascru]

Hi guys
I need the AMOs list to generate a teil-regen in HiPath 4000 V2, V3, V4, V5 and V6.
I have this list but I know that for each version change the AMOs. I also have manuals for each version but can not find list of AMOs:

DIS-PASSW;
REGEN-ANUM:A1;
DIS-VEGAS:SHORT,ADS&SWU;
REG-DBC;
REG-CONSY;
REG-DDSM:A1;
REG-FEASU;
REG-DIMSU;
REG-ZAND;
REG-TDCSUEV=S0CONN;
REG-TINFO:T;
DIS-DATE;
DIS-BCSU:TBL;
REG-BCSU ;
REG-UCSU;
REG-TDCSU;
DIS-SDSU:NOGEN&GENNR,,PEN,PER3;
REG-DCIC;
DIS-DDSM:A1,SCSI;
DIS-CODEW;


Please send me AMOs list for each version or tell me where I can find. thank you very much for the help

best regards

 

[sbcsu]

It is mostly correct.
Do not worry about different versions, they are mostly the same AMO wise.
Save the information below (between the //) as a TIEL.MAC File and run from within Comwin using the Macro function...

//

IF (PROMPTING) THEN DIALOG
DEFINE DATE:10,NAME:30
DIS-DATE;
GETVAL DATE=" | 2"
DIS-FBTID;
GETVAL NAME="CUSTOMER NAME : "
/** WARNING NEW PROTFILE WILL BE SET UP WITH CUST NAME AND DATE AT END PROT FILE WILL BE RETURNED TO NORMAL */
PROTFILE "%NAME Part2011Reg 2%DATE "+
/* sets up protfile in your prot dir with cust and date */
/*
/*
/* ************* Partial Regeneration Command Batch for HiPath4000: **
/*
/* Partial Regeneration Command Batch for HiPath 4000: 2011 REF 21/12/2010
/* */
DIS-PASSW;
HICOM
REG-ANUM:A1;
DIS-VEGAS:SHORT,ADS&SWU;
REG-DBC;
REG-CONSY;
REG-DDSM:A1;
REG-FEASU;
REG-DIMSU;
REG-ZAND;
REG-TDCSUEV=S0CONN;
REG-TINFO:T;
DIS-DATE;
DIS-BFDAT;
REG-BFDAT;
REG-APESU;
DIS-BCSU:TBL;
REG-BCSU;
REG-UCSU;
REG-TDCSU;
DIS-SDSU:NOGEN&GENNR,,PEN,PER3;
REG-DCIC;
DIS-DDSM:A1,SCSI;
DIS-CODEW;
END
/*
/* HELP ALONG CC OR ALL WHEN RESPONSE CTRL M TO CONTINUE MACRO
/* cc; /* hicom 300 new */
/* all; /* HiPath */
/** WARNING OLD PROTFILE RETURNED TO NORMAL */
PROTFILE "prDATE.pro"+
/* returns you to your normal protfile date stamped */
END

//

 

[sbcsu]

EDIT above
There are 25 spaces between GETVAL DATE-"
and
| 2"

There are 14 spaces between GETVAL NAME="CUSTOMER NAME
and
: "

The web site here blanks out the spaces

 

[sascru]

thank you very much, this is helpful. Best Regards

 

[sascru]

OK thanks very much. I'll remember to build the file.

 

[sbcsu]

Here is a link to the file itself
Link

 

[RonnieDio1]

works in 4000 v. 7 ?

 

[sbcsu]

Yes it should work in any version, it is for the sales department to see what is on the system.