Siemens HiPAth 4000 DHCP setup

[jfanfossi]

Hi, I am looking for the DHCP option 43 setup for the OptiPoint 410/420
Thank you

 

[donb01]

The following is Cisco-speak, don't ask me to translate it. I got it from our vendor and passed it off to IS. I would assume you would replace your own IP addresses into the equation, and note the red/underlined 03 which is supposed to be a hexidecimal representation of your chosen VLAN number. If I screwed up the underlining, it is the right half of the 9th word in the string.


This is a data subnet from a wan office. The underlined 03 is the VLAN id in hex. The voice scope doesn’t require any extra options.



ip dhcp pool xxxx

network 10.10.10.0 255.255.255.0

default-router 10.10.10.1

dns-server 10.17.18.5 10.17.12.5

option 43 hex 010a.5369.656d.656e.7300.0000.0204.0000.0003.0000.0000.00ff

!

 

[jfanfossi]

Thank you.
This is exactly what I have configured in my router.
I do ge the VLAN info, but no ip address mask or default gateway....