ashutosh2501
Technical User
We are having a peculiar problem while networking Avaya IPO 500 Version 9 with Hipath 3800 V8 over Qsig.
There are 2 nos. Hipath 3800 linked with each other on Cornet over PRI
There is one PRI incoming trunk at each Hipath.
Now we have installed 3 nos. IPO500 Version 9 and presently linked over Gateways to Siemens.
We have connected IPO to Siemens over Qsig.
All calls from Avaya IPO to siemens go well for ring, OFD and speech, however
calls from Siemens land at desired extension, and in speech mode gets disconnected with 5-6 seconds.
we put trace on avaya, which indicates, a call disconnect signal comes from Siemens.
Can you suggest the remedy, Please?
There are 2 nos. Hipath 3800 linked with each other on Cornet over PRI
There is one PRI incoming trunk at each Hipath.
Now we have installed 3 nos. IPO500 Version 9 and presently linked over Gateways to Siemens.
We have connected IPO to Siemens over Qsig.
All calls from Avaya IPO to siemens go well for ring, OFD and speech, however
calls from Siemens land at desired extension, and in speech mode gets disconnected with 5-6 seconds.
we put trace on avaya, which indicates, a call disconnect signal comes from Siemens.
Can you suggest the remedy, Please?