In a Hipath 3750 is it possible to have a station that is not answered forward off site? I need to have the call route over a tie line, dial a pilot number, pause, then dial the called extension followed by #. This is to route the caller to an analog voicemail system. I can create a 4 digit number in the dial plan that will route to the tie line, but since that isn't a station I can't add it as a forwarding index.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Siemens 3000 forward off site
- Thread starter keyset6
- Start date
- Thread starter
- #2
In Incoming calls - Call forwarding, in the Target field toward the top there's a setting - External destination. I created a 4 digit entry in the dial plan to route over the tie. In the Call No: field (when selecting external destination) I entered that number. The no answer call did forward over the tie, but I didn't hear any DTMF after I answered the call offsite. I'll need to test more on site.
- Status