Here's the setup. PRO II. Ans mach on slt adapter. Btns 1-8 are the co lines - no ring (shared lines). Btn 9 is sie for main phone - delay ring in 4-37. When I call ans mach directly it answers. When I call main phone, no answer. Checked my programming 5 times (identical programming on another ansmach in office with no trouble). I cannot do cfbna because there are sie keys on other phones for the main phone; ansmach set to answer after 4 rings via switch. The kicker....this used to work, and I have reset the system.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIE on answering machine
- Thread starter havonasun
- Start date
- Thread starter
- #3
Yes and Yes. I just got an idea that the ansmach may not be responding to the cadence, so I will try putting another machine in its place. This ansmach was from a different system and slta, although both systems are proII and programmed similarly.
- Status
Similar threads
- Locked
- Question
