Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Side by side subreports

Status
Not open for further replies.

Thant

Technical User
Dec 31, 2007
103
US
Greetings,
I have a kpi report card grouped by quarter and I have created a second copy of the report for the previous year. I would like to be able to place them side by side but every time I do this I get one whole blank page before it as well as the reports not matching the quarter for quarter
Example:
1st quarter 2010 1st quarter 2009 (subreport)
Offered xxx Offered xxx
Answered xxx Answered xxx
% answered xx% % Answered xx%

Next page
2nd quarter 2010 2nd quarter 2009 (subreport)
Offered xxx Offered xxx
Answered xxx Answered xxx
% answered xx%

I hope this makes sense and thanks in advance

Anything worth doing is worth messing up at least 5 times before you get it right!
 
If you have a group on quarter, place the subreport in a group header_a section and format it to "underlay following sections", with the main report group header fields in group _header_b.

You could try selecting the sub->format subreport->common tab->uncheck "keep object together" and see if that corrects the initial blank page.

-LB
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top