R.b. Shrestha
Systems Engineer
I need to shutdown of the hipath 4000 V5 system for the regular servicing of the whole system. I don't know the shutdown process. Please help me .................
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Shutdown process of Hipath 4000 V5 2
- Thread starter R.b. Shrestha
- Start date
- Status
-
1
- #2
No idea what 'regular servicing' of the whole system is but to shutdown a V5 system you first need to backup the system.
EXE-UPDAT:BP,ALL;
EXE-UPDAT:A1,ALL;
DEA-DSSM:A1,1,J;
COPY-DDRSM:A1,1,E,1,J,N;
If you can take out a REGEN file all the better or back it up to a Compact Flash drive
COPY-DDRSM:A1,1,E&F,6,E&F,N;
Then to shut down the system you need to deactivate the hard disk to prevent damage.
DEA-DSSM:A1,1;
Then power down the system.
EXE-UPDAT:BP,ALL;
EXE-UPDAT:A1,ALL;
DEA-DSSM:A1,1,J;
COPY-DDRSM:A1,1,E,1,J,N;
If you can take out a REGEN file all the better or back it up to a Compact Flash drive
COPY-DDRSM:A1,1,E&F,6,E&F,N;
Then to shut down the system you need to deactivate the hard disk to prevent damage.
DEA-DSSM:A1,1;
Then power down the system.
-
1
- #3
That will shutdown the RMX but not the Assistant. Probably be OK, but to be sure not to cause damage to the file system, shutdown the Assistant too.
dea-dssm:a1,1,,yes;
That's from memory, if it's not 2 commas it's 3. Prompt is "UNIXSHUT".
dea-dssm:a1,1,,yes;
That's from memory, if it's not 2 commas it's 3. Prompt is "UNIXSHUT".
- Status