Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sharing LAB for certification

Status
Not open for further replies.

Fsebera

MIS
Jan 28, 2001
14
0
0
US

Fairfax VA, email ---> fsebera@yahoo.com

Looking for informal "stress free" study group (~3) to join or start a study group
in the Fairfax Va (USA) area - All equipment is available for use, hands on is a must!!
All equipment is under maintenance agreement via Cisco!!

I have a non-production Cisco lab with the following equipment:

12 [2500 and 2600 series] routers (2 with Token Ring interfaces)
2 7000 series routers
1 5500 series switch with RSM /4 port Serial interface module and 10/100Mbps channel cards
1 5000 series switch with RSM /4 port Serial interface module and 10/100Mbps channel cards
3 2924 series switches (IOS based)
2 1900 series switches
4 BRI interfaces (ISDN)
2 PRI interfaces (ISDN)
2 ISDN Simulators (2 ports each)
AS5300 Access server
External CSU/DSU's
Remote dial-in authenticated access via TACACS+ server
Syslog server
TFTP server
IBM AIX server
Novell server
NT 4.0 server
Sidewinder Firewall

CCO account for documentation and software downloads (for lab equipment)

Plus more, other equipment will be on order.

email -------> fsebera@yahoo.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top