SGI Login

[Guest_imported]

I have a SGI system access via NIS . When users try to login the system from console or remotely it take a very long time to get a login session. Once the user has establish his/her login, when tring to open an xterm or any other task it will take 5 or more minutes before the system will response. I feel that I have check everything from network files to nfs and nsd daemons. What could be the problem?

 

[maxicosie]

Hey,

If your network is connected via hubs or switches you could check out the speed offwich they are connected. If it is autosensing there could be a problem. Try to set a standard speed on all devices. e.a. switch port 100mb/sec, SGI 100mb/sec and so on.

This might work......

Maxicosie