mjnaaktgeboren
Technical User
Has anyone gotten sftp to work as a transport method
(ie sftp username@hostname.com) as an output adapter?
We have the security option installed.
I get an ERRORCODE= 9 ERRORMSG= Target not available
userid and password are correct, but could I be using the wrong adapter for this transport method?
---
works (command line)
===========================
sftp username@servername.hostname.com
Connecting to servername.hostname.com...
WARNING: To protect the system from unauthorized use and to ensure that the
system is functioning properly, activities on this system are monitored and
recorded and subject to audit. Use of this system is expressed consent to such
monitoring and recording. Any unauthorized access or use of this Automated
Information System is prohibited and could be subject to criminal and civil
penalties.
username@servername.hostname.com's password:
sftp >
---
does not work (via mercator adapter)
===========================
Mercator FTP Adapter, Version 6.7(306_1tip_230903)
Copyright © 1998-2000, TSI International Software, DBA Mercator Software
Built for HPUX11 on May 6 2004 at 14:48:38 by rbrooks.
Retry Count is 10. Retry Interval is 5. OnFailure is Rollback.
Fetch Unit is 0. Card Mode is Integral.
Will process 6980 bytes of data.
Run Started at 15:49:06.246 on 03/16/05.
Options used: trace,name,url
URL ftps://username:********@server.hostname.com/IN/myfile.txt.pgp;type=A will be used.
Sockets Client ID 2 enabled.
Using explicitftps: protocol.
Server host is 'servername.hostname.com'.
Couldn't locate host information.
Using port '21' for the connection.
Connecting to 'servername.hostname.com'.
Socket Opened.
Connected.
> (I)
<AUTH TLS-P
> (I)
<AUTH SSL
> (I)
Sockets Client ID 2 disabled.
Attempt #1 failed, will retry after 5 second delay.
.
.
.
.
Attempt #10 failed, no more retries allowed.
Run Terminated at 16:02:21.029 on 03/16/05.
(ie sftp username@hostname.com) as an output adapter?
We have the security option installed.
I get an ERRORCODE= 9 ERRORMSG= Target not available
userid and password are correct, but could I be using the wrong adapter for this transport method?
---
works (command line)
===========================
sftp username@servername.hostname.com
Connecting to servername.hostname.com...
WARNING: To protect the system from unauthorized use and to ensure that the
system is functioning properly, activities on this system are monitored and
recorded and subject to audit. Use of this system is expressed consent to such
monitoring and recording. Any unauthorized access or use of this Automated
Information System is prohibited and could be subject to criminal and civil
penalties.
username@servername.hostname.com's password:
sftp >
---
does not work (via mercator adapter)
===========================
Mercator FTP Adapter, Version 6.7(306_1tip_230903)
Copyright © 1998-2000, TSI International Software, DBA Mercator Software
Built for HPUX11 on May 6 2004 at 14:48:38 by rbrooks.
Retry Count is 10. Retry Interval is 5. OnFailure is Rollback.
Fetch Unit is 0. Card Mode is Integral.
Will process 6980 bytes of data.
Run Started at 15:49:06.246 on 03/16/05.
Options used: trace,name,url
URL ftps://username:********@server.hostname.com/IN/myfile.txt.pgp;type=A will be used.
Sockets Client ID 2 enabled.
Using explicitftps: protocol.
Server host is 'servername.hostname.com'.
Couldn't locate host information.
Using port '21' for the connection.
Connecting to 'servername.hostname.com'.
Socket Opened.
Connected.
> (I)
<AUTH TLS-P
> (I)
<AUTH SSL
> (I)
Sockets Client ID 2 disabled.
Attempt #1 failed, will retry after 5 second delay.
.
.
.
.
Attempt #10 failed, no more retries allowed.
Run Terminated at 16:02:21.029 on 03/16/05.