rajeshbahl
IS-IT--Management
I was installing Novell SFT_III ver 4.2 on Digital Prioris xl 5133 servers.The MSL cards are of LANBIT with utp interface.
While converting the Novell 4.2 to SFT-III , the secondary server (the one on which standalone Netware4.2 was installed) gave abend after loading the msl driver on primary server and "making the drivers on new server as the original" option.
I started installation manually.Somehow it got completed but almost everytime when we give the "activate server" command,the volumes get mounted but secondary server displays the message: error delaying restart server in 10 seconds.....
and the secondary server resets.After rebboting for the first time it works fine till another reboot.Also remirroring takes place everytime.
Also ioengine shows the message:
unable to borrow memory from msengine.
****Is there anyway we can do the installation "normally" i.e. in auto mode?
Any idea how to resolve problems mentioned above?
Thanks In Advance
Rajesh K.Bahl
While converting the Novell 4.2 to SFT-III , the secondary server (the one on which standalone Netware4.2 was installed) gave abend after loading the msl driver on primary server and "making the drivers on new server as the original" option.
I started installation manually.Somehow it got completed but almost everytime when we give the "activate server" command,the volumes get mounted but secondary server displays the message: error delaying restart server in 10 seconds.....
and the secondary server resets.After rebboting for the first time it works fine till another reboot.Also remirroring takes place everytime.
Also ioengine shows the message:
unable to borrow memory from msengine.
****Is there anyway we can do the installation "normally" i.e. in auto mode?
Any idea how to resolve problems mentioned above?
Thanks In Advance
Rajesh K.Bahl