Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SETUP SITE TO SITE VPN USING NAT THROUGH THE TUNNEL

Status
Not open for further replies.

drbk563

IS-IT--Management
Nov 21, 2006
194
US
I have a site -to- site VPN setup with a remote site, using the real address of the each others network. The problem is that now I have to nat the users out the outside interface of the ASA for the ASA site to the PIX side. Also, there are four devices located behind the PIX using private address which also have to be natted out using four static public ip address. The users on the ASA side are going to peer with VPN concentrator (167.X.X.23), and reach a device located behind the VPN concentrator using the public ip of the device (167.X.X.224). I need help setup the VPN from the for this to work. The only config which really care about is the ASA side? Can someone guide me on this setup?
You can find a diagram of this network at Thank you for any help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top