Setup MCR to ring forever?

[FishDick]

I have MCR on 5 sets in addition to two primary SCR on each set.

Calls to MCR go to VM if no answer.

Can I change so that MCR rings forever?

I thought I did this before with secondary forwarding or maybe im crazy.

 

[acewarlock]

Is the MCR on KEY 0?

 

[FishDick]

MCR is on Key 08 on 2616

 

[FishDick]

Here is the TN.

DES MAIN
TN 012 0 00 02
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 3150
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 12
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRA NIA OLA VCE DRG4
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFA MRD DDV CNIA CDCD MSID DAPA BFEA RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHA CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3
CPND_LANG ENG
RCO 0
HUNT 3150
LHK 1
LPK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 1072 0 MARP
CPND
NAME Phone User
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 1272 0 MARP
02 TRN
03 AO6
04 SCC 0061
05 PRK
06 CFW 4 1001
07
08 MCR 3104 0 MARP
CPND
NAME Building Department
XPLN 27
DISPLAY_FMT FIRST,LAST
09 ADL 16
10 ADL 16
11 BFS 032 0 00 13
12 ADL 16 1013
13 ADL 16 1005
14 MWK 3150
15
DATE 10 OCT 2006

 

[PERRYPJ]

MARP IT ON ONE OF THE PHONES THAT DON'T FORWARD TO VOICEMAIL

OLD ROLMEN WORKING ON NORTELS

 

[EddieDuece]

MARP the MCR to a 500 set with no FDN or hunting allowed. Then you don't even have to have a set connected to the 500 port....

 

[EddieDuece]

Or for that matter, MARP it to key 0 of a 2000 or 3000 series phone on key 0. Thats how it worked for us....Not HTA or FDN

 

[jamie2]

If you use the 500 set, make sure the 500 has the 'cls mcra'

 

[johnpoole]

all the post are right, as usual. yet another way is to move it so that it is not key 0 on any phone.. it could only seem to forward during one senerio that i can think of. if i use key 0 as a scr or different mcr and use lhk to key 1.. a call dialed to key 0 and lhk's to key 1 would still fna.. that would still be controlled by the marp of the original dialed dn... i set that up for a small dept.. dial anyone personal and if they are on the set, it rings the same mcr on five phone.. rco is 5 rings so anyone can answer it before it goes to mail... but dial the mcr and it neither hunts or forwards.. you could get in your truck and drive across town and answer it yourself (almost)

john poole
bellsouth business
columbia,sc

 

[FishDick]

Thanks for all the suggestions.

I ended up removing MAPR from all MCR and creating a 3000 series phone as Eddie suggested.