Setup Door intercom system with CCM 4.1

[mrclean613]

Greetings ~

I have an application to setup a door intercom ssytem with our Cisco 4.1 Call Manager. When the delivery person presses the intercom button, it needs to dial x6300 (shared line) on the 7961 sets

 

[ptdog]

This can be achieved using a Viking door phone. It is just an analog phone that has one button and a speaker. You program the Viking phone to dial what ever digit you want. This plugged into an FXS port. If you want to call back to the door, call the extension of the fxs port.

check out

http://www.vikingelectronics.com