cjtucker1976
Technical User
How do I configure an Option 61 to send me the alarms. Right now they go to our vendor but I would like to receive them too.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setup Alarms
- Thread starter cjtucker1976
- Start date
- Status
That is not part of the PBX. It's the modem, provided by the vendor that does it.
~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
Avaya911PLM
Vendor
LD 117
SET OPEN x aaa.bbb.ccc.dddd
Where x is 1 to 8
and aaa.bbb.ccc.ddd is the IP destination
DO an EDD in LD 43 to activate. Your destination system will need the MIBS.
--
Fletch
Nortel Emergency Services PLM
Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast
SET OPEN x aaa.bbb.ccc.dddd
Where x is 1 to 8
and aaa.bbb.ccc.ddd is the IP destination
DO an EDD in LD 43 to activate. Your destination system will need the MIBS.
--
Fletch
Nortel Emergency Services PLM
Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast
You think? In an Option 61? I guess it could be something more recent. His post from Dec 08 had MerMail running.
~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
- Status
Similar threads
- Locked
- Question
- Locked
- Question