Setup a route to dial *67 to block call id 1

[curlycord]

This possible?

Say intercom 8 and the system then grabs a line and dials *67 ???

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[fireeater]

yes i have done it many times just put in a pause or 2 after the *67

i've done it with some customers to dial the 613 when we changed to 10 digit (lazy people)

HALLOWED ARE THE ORI

mike

http://www.ics-on.ca

 

[fireeater]

oh and make sure the *67 works for you telco lines ,some buisness line don't allow that feature

HALLOWED ARE THE ORI

mike

http://www.ics-on.ca

 

[curlycord]

Thanks

ICS and 613, your close to me......I used to work with a few techs from the Philipines...Pablo was one, great guys....they all went to ICS in Markham I think it was, but that was like 15 years ago.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[KE407122]

We do that but only on copper trunks not PRI.

*67P in the routing.
Dialing Plan/Routing

Route External Number Use Pool

00X *67P A

KE407122

You can lead a horse to water but you can make glue out of him too.