Setup 11C with new DID's

[kcdean]

Our company acquired an 11C that we have placed back in service. I got PRI up, but I still can not place calls. When I dial the lead number I can not get through.

Do I need to do something else? Do I need to change something? This is a new block of 200 numbers from AT&T with a new NXX of 823

Thank you!

 

[GHTROUT]

I'm not sure anyone can tell if you need to change anything, since nobody knows what you have yet.

1. Are the trunks and route programmed?


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[tnphoneman]

This could be a simple 5 minute fix or several hours to trace teh trouble. I suggest you call for help.

Signature===========================================

http://www.greatwhitetechnologies.com

Aastra Authorized Reseller

 

[kcdean]

I have build the route, loop, dch and trucks.

Get a fast busy when I gall the lead number.

 

[GHTROUT]

Can you make outgoing?

I'd start by turning on DCH messaging I guess.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[kcdean]

Out bound call work fine.

I will durn on DCH.

Thanks!

 

[telebub]

Make sure you have an LDN number programmed in the CDB that matches the number of digits being sent by the CO.

 

[phones1]

teleubub, sound right. make sure your LDN number is the same length as your delivered digits.

Remember if it doesn't work hit it harder

Scott UK