Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting Up Telecommute/VPN on 1710 w/ IAS Radius

Status
Not open for further replies.
bobcrane

bobcrane

MIS
Sep 12, 2003
17
US
We currently have a 1710 setup to allow remote offices to tunnel into headquarters. We now want to give remote users the ability to connect to ISP at home, and connect to VPN via IPSec using a W2K box as a Radius server.

Does anyone have a sample config or a link to a sample config that is compatible with IOS?

W2K is on the domain
Clients will do split-tunneling
Compatibility only for XP clients in the beginning.

Thanks,

Bob
 
Status
Not open for further replies.

Similar threads

testman1
  • Locked
  • Question
SIP telephone ring on second call
Replies
0
Views
107
testman1
testman1
quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
62
quazimotto
quazimotto
bfordz
  • Locked
  • Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
97
bfordz
bfordz
stanlyn
  • Locked
  • Question
HowTo Install Multiple PAP2T ATA Devices on Same Lan
Replies
3
Views
163
iggsterman
iggsterman
jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
132
jarod_paris
jarod_paris

Part and Inventory Search

Sponsor

Back
Top