Setting Up System Speed Call and Using it. 1

[zcgillihan]

Howdy!

We have a analog phone that we want to only be able to call 3 outside numbers. I created a System Speed Call:
SCNO 0002
SSC
NCOS 01
DNSZ 16
STOR 0 9865####
STOR 1 91800895####
STOR 2 9609####
In LD 10 I added SSU 2 to the FTR section of the phone. The NCOS of the Phone is set to 0 and the CLS is now FRE.

When you set a system speed call on the phone, do you noramlly just dial the number and it looks to the list and says yes or no? Do they have to enter a code and then the 0-2?

Any help would be great! Thanks!

 

[bigindian65]

I believe it is a list that they are given, so sysspeed 01 is blah, blah, so on and so fourth

Mato' Was'aka

 

[zcgillihan]

Its a M8009 phone, what key would be sysspeed?

 

[GHTROUT]

You don't really need a "KEY" to use System Speed (you can access it by dialing a code)

But you can use one: KEY x SSU



[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[GHTROUT]

Oh, here is the code list:

http://www.ghtrout.com/ghtrout/files/SPRE.html

Or, you can create a "Flexible Feature Code" of anything you wish (using LD57)


[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[zcgillihan]

Thank you for the link to that list! Figured it out!