Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up PRI in Ontario

Status
Not open for further replies.

TheMitelGuy

IS-IT--Management
Mar 28, 2003
1,321
CA
Does anyone have any information about setting up a PRI in Ontario on Bell Canada.

I'm looking for programming steps and what options I should order from Bell Canada. I don't want to read the manual, as the manual doesn't tell you stuff like this. The manual is written in a language that even senior telecom guys SOMETIMES can't even understand.

I just want to see what all is required (steps to take). It's for my own learning. I'm interested in learning the LD's that I need to use, and what information needs to go into those LD's.

Thanks
Neil
 
There's
ld 17 - dchannel and loop programming
ld 14 - for span port programming
ld 16 - for route programming
ld 60 - to bring up and test loop
ld 96 - to test and stat the dchannel

Read those ld's and it's not that hard.

John
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top