setting up pointtopoint for 3 sites

[badbadzt]

I'm currently setting up a network consisting of three routers on different sites. two routers (cisco 1600) will connect via point to point lease lines(1 64kb/s and 1 256kb/s) to a cisco 2610.

What type of encapsulation and Interior routing protocol would be most appropriate?

 

[jeter]

use the default serial encapsulation on the routers. Setup
the WAN and Lan ip's and setup a static route of the ips back to the host. Is there a server at the host for the remotes? If so insert an ip helper address at the remotes. Jeter@LasVegas.com
J.Fisher CCNA