Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up PIX to recieve SNMP requests

Status
Not open for further replies.
konthag

konthag

IS-IT--Management
Mar 7, 2003
3
HU
Our company has a Cisco PIX-515 Firewall.

I want to set up PIX configuration to recieve SNMP queries from a certain host (10.6.7.8) on internal, LAN connection only.
I found 4 lines in the documentation according to this:
#smtp-server host inside 10.6.7.8
#smtp-server location MyOffice
#smtp-server contact MyName
#smtp-server community xyzxyzxyzxyz
Question 1: Are these settings enough?
Question 2: How can I try it out? I found a sw - LoriotPro -, but it seems too complex for me.

tnx,
Gabe
 
Status
Not open for further replies.

Similar threads

Sameer258
  • Locked
  • Question
Need Help to Find ip and mac address with email who one open my email
Replies
0
Views
292
Sameer258
Sameer258
Sparrow4
  • Locked
  • Question
Configure Avaya IPO R11 / VM Pro + Office365 or Exchange for voicemail to email
Replies
2
Views
307
Johnkite
Johnkite
brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
71
brownmab53
brownmab53
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
251
nnaarrnn
nnaarrnn
xwray
  • Locked
  • Question
PIX 501 DHCP Server function
Replies
0
Views
61
xwray
xwray

Part and Inventory Search

Sponsor

Back
Top