Setting up Miran on CSK1 7.65

[Swampfire]

I am looking to setup up a simple announcement using a Miran card for a customer on release 7.65,

The customer does not have callpilot and all they require is a simple announcement before the call rings to SCR key on a couple of phones. I don't really want to change to an ACD setup as this would stop the 4 phones ringing at once.
My question is would a Miran allow me to have a simple announcement play and then send the call to a DN number.

Thanks in Advance

 

[Juggler42]

Take a look at the Miran section on Mike’s PBX cookbook under Meridian, there are instructions on install Miran.

http://pbxbook.com/meridian/

 

[KCFLHRC]

A Miran card will not do what you are wanting.

 

[janaya]

MICD might do that. the Call Director.

What voicemail system do they currently have? most offer some type of menu system setup.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/

 

[Draggaj]

A Miran card will do what you are wanting.

Program an ACD with the desired DN
MAXP =1
NRRT <the MIRAN channel route number>
NCFW < the destination SCR DN you want to send calls>

When dialled the ACD will play the NRRT, then direct call to the NCFW.

 

[hached]

Draggaj is correct.

Have you verified that you have licensing for RAN in LD14? Also I don't believe that the Miran card is supported anymore but it should still work.