Setting up live record?

[chipig]

Setting up live record?

Is this really possible? I have followed all the instruction and it still not working.It would be nice to get it work cause I cannot find any posts on the subject.If I press the designated key on my Dterm for starting the recording the light key stays on and won't turn off even if I press the designated end key for live record.I have to disconnect line from the phone to turn it off.

Here is what I did so far:


1-1303>2000:1-0 //Enable message waiting service

2-9000>2000,05:F1091- //Record line key functions
9000>2000,06:F1092- //Pause
9000>2000,07:F1094- //End

3-93>2000:2000- //Set extension number

4-5115>01:2050- //Set pilot number

5-08>109:0- //Turn on the live record beep

6-08>141:0- //Set up automatic live record

7-1323>2000:1-0 //Automatic live record for the extension

8-3522>00:0- //Automatic live record for trunk call

9-Live record is enabled in the AD-64.

10-Barge in code is *4 in the barge in field of the AD-64.

11-200>A4:A006- //Executive override code (*4)

The part where I get confused is the barge-in code and executive override.What in the world is executive override? I just don't get it.

Am I missing something?
Is this function supposed to work between 2 PBX?

 

[gbaughma]

Executive Override (if I remember right) allows a "ring through"; in other words, you're on the phone, the boss REALLY needs to get a hold of you... he can dial a code, and your phone will ring regardless.

Not to be confused with a Whisper Page, which is where a secretary, for example, can announce into a call (without hearing the boss's conversation) that he has another call.



Just my 2¢
-Cole's Law: Shredded cabbage

--Greg

http://parallel.tzo.com