Hi,
I have a Standalone W2K server with two nics installed. The first NIC is connected to our main network which has many netware servers and and established NDS. The second NIC is connected to an Isolated Network running through one 3com switch. On this isolated network there are about 3 clients and 20 copiers\printers. I want to setup the W2K server so that the Printers and see the Netware network on the other side of the Server, but need some assistance setting up IPX routing. I have already setup IP Routing on the server with DNS and this works perfectly, however I am not so experienced using the IPX protocol. Any advice would be much appreciated.
I have a Standalone W2K server with two nics installed. The first NIC is connected to our main network which has many netware servers and and established NDS. The second NIC is connected to an Isolated Network running through one 3com switch. On this isolated network there are about 3 clients and 20 copiers\printers. I want to setup the W2K server so that the Printers and see the Netware network on the other side of the Server, but need some assistance setting up IPX routing. I have already setup IP Routing on the server with DNS and this works perfectly, however I am not so experienced using the IPX protocol. Any advice would be much appreciated.
