Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

setting up IP telephony

Status
Not open for further replies.
kse

kse

IS-IT--Management
Apr 19, 2002
29
0
0
KW
I got a problem, I am trying to setup IP telephony between two sites one of the sites has a firewall (main site) how can I set the firewall to let the IP's that belongs to telephoy pass through it I opened the UDP port but it didn't work , also can I use 2 networks one is for data users and the other for IP telephony if so how to configure it in the firewall my firewall has to NIC one inside and the one is for outside using NAT

I appreciate your help
 
Status
Not open for further replies.

Similar threads

Gnjiro
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
0
Views
82
Gnjiro
Gnjiro
R_Inzano
  • Locked
  • Question
Callmanager waiting to pick up a call
Replies
2
Views
54
whykap
whykap
Siva reddy
  • Locked
  • Question
No audio when calls made from and to Cisco ip communicator over new Sip trunks 1
Replies
3
Views
94
gnrslash4life
gnrslash4life
GrandmaBeth
  • Locked
  • Question
Installing New IP Phone Firmware
Replies
2
Views
56
GrandmaBeth
GrandmaBeth
hotelmotelpatel
  • Locked
  • Question
Cisco UC560 telephony wizard stops at 99 percent
Replies
0
Views
16
hotelmotelpatel
hotelmotelpatel

Part and Inventory Search

Sponsor

Back
Top