setting up DS400 for network connection

[yuds]

How we must configure my network and my ip addres ?
I can't conecting ETH0 in ds400 with ip 192.168.70.123 via telnet.

i didn't have serial cable FRU PN 13N1792 for acesing ds400 via terminal,

 

[yuds]

PROBLEM SOLVED, it's very easy.

 

[digimatrix]

I have the same issue with you but didn't see the solution.
Please post the solution again with thanks in advance.

 

[zombielun]

Per IBM's documentation and personal experience:

The default IP address for the Ethernet port on controller A is 192.168.128.101. The default IP address for the Ethernet port on controller B is 192.168.128.102. The subnet mask for both Ethernet ports is 255.255.255.0.

Live Free. Die Well.