Setting up date/time

[StephanHesse]

Hi All,

i tried to setup the time on our Meridian 1 Option 11 but it was not working. As i know you must change the time in LD 02 and than you have to type STAD "day month year hour minute second". I did it in this way but it was not working.
Can anybody tell me how to set up the time and date???
I am not a specialist on this system.

Thanks in advance!!!

Stephan

 

[vztech]

you are doing it correctly
STAD (space) Day(space)Month (space) etc.
takes a little time to refresh all the sets

It's only dialtone-VZ

 

[johnpoole]

it can take up to an hour for it to change all the sets.. it updates the time at the next lamp audit scan.. to push the correction to a phone

ld 32
disu 4 0 0 0
enlu 4 0 0 0

that would sync the time on that set to the switch time

john poole
bellsouth business
columbia,sc

 

[johnpoole]

faster way switch wide would be to remove (temp) all lds from drol except 30.. the do a midn... that would push the time to all displays.. then put the midn back together..

john poole
bellsouth business
columbia,sc

 

[Johnthephoneguy]

You should always TTAD before STAD so you can see the exact format the PBX is expecting to see also.

 

[StephanHesse]

Hi all,

thank you for your help but i have another problem!!!
After the login to the system i type ld 02 and after that i got the message TFC000 with a dot behind it. When i press enter the next message is TFC200 also with a dot behind it. At this point i don´t know what to do. I cannot make a logout etc.
Does anybody know what to do?

Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Stephan

 

[johnpoole]

looks like your still in ld 2... try ****

john poole
bellsouth business
columbia,sc