Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up Cisco ATA with Avaya G3 V16 for faxing

Status
Not open for further replies.

njnicka

IS-IT--Management
Feb 9, 2010
32
US
Hey Guys I need your help, i'm trying to verify which Cisco ATA device can be used with an Avaya G3 V16 switch. I'm trying to set up a fax line for a building that doesn't have copper on the campus.

Thanks in advance

Nick
 
Ideally, SIP and Session Manager. Alternatively, H323 trunked - and there were some posts here about getting the old h323 stuff for audiocodes gateways for those that can't/don't want to SIP to SM.
 
I have both Audiocodes MP102 and Cisco SPA122 - audiocodes using H323 to CM (6.2), Cisco using SIP to SM.
Both work fine.
Cisco cheaper and smaller - thinking about replacing all the audiocodes with this....

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top