Setting up Call Pilot 100

[craigbeale]

Hi,

I just got a call pilot 100 to interface with my Norstar CICS.

I plugged it into my ethernet network, connected the PORT-A to the port on the front of the CICS. and turned it on.

http://192.168.110.10

doesnt ping or let me access it via http.

any ideas on what the problem is?

Thanks,

Craig Beale

 

[MagnaRGP]

first you should post in the norstar forum

second, is your network using the .110 subnet? if not you need to be connected via a cross-over cable and assign yourself a static ip in that subnet.

 

[TAnselm]

If you are in a switch/hub port you don't need a cross-over cable, but you do need to be on the same subnet. Check the network settings on your computer. I believe that the default for the call pilot is 192.168.110.10 so give yourself a static ip of 192.168.110.XXX

XXX of course being a number between 1 and 255 (skipping 10 of course)