Setting up Aux ringer and paging on BCM50

[newkid2007]

I am using Valcom 1036C horn with an V9924 Audible ringer unit and V1124 power supply. I am having a hard time getting the paging and aux ringer to work. The paging works but not the aux. ringer. I checked the aux ringer on the telephone lines and programmed it on the selected telephones. Can anyone tell me the correct setup for all of this equipment to work.

 

[Crowtalks]

You will need the V9945 ringing horn to ring off the system

 

[newkid2007]

We have our paging working. This is how we done it.
Equipment Valcom vp 1124 pwr, Valcom V-1036, V-9924c Aub. ringer. For paging you will connect paging out port (blor-orbl) on the bcm50 to pin 16/17 on the v-9924c Aub. ringer. For Aux. ringer you will connect aux. ringer port(rs-sr pair) on the bcm50 to pin 7/22 on the v-9924c Aub. ringer.

Now we can page and when the storage phone rings, they both ring over the horn.