Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up a Remote Access number

Status
Not open for further replies.
Jul 14, 2005
18
US
Hello everyone. I would like to know how to set up a RAS telephone number within the PBX. We would like to perform administration remotely.
 
faq690-6415

This will cover your RAS connection.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594


 
For that you need the dial up number for the INADS port and customer has access to INADS port turned on in the system parameters customer options form.

You can find the number on the 25 pair of aux1 cable.

Their may be a back door that I am not aware of through the CLAN, but you may not even be able to have one with your version of software.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594


 
Ok the instructions are very good but I am missing something. What is the default username and password for the RAS connection. It is mentioned that it is not the same as the switch, what is it?
 
The login and password are the ones you are using for your machine or PC you are using.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top