Setting up a new range of extension number

[major3838]

Hello All,

we tried to setting up a new range for extension numbers in MX-One (EMG).
Within RDS configuration, PBX numbering series, we add a new range, and do the refresh database.

In EMG the new range is still not there.

Is there something more to do in order to reflect the new settings ( we don't want to use MML ) ?

 

[nschreuder]

As far as i know is there no way to assign a numbering serie with EMG without using MML in TTY.
In my opinion is this unfortunately one of the restrictions of EMG.

 

[major3838]

Thanks for your answer.

So if i 've to go with MML.....
could you give me the command ?

 

[whosrdaddy]

Hi,

example for adding range 1000-1999
NANSI:NUMSE=1000&&1999,NUMTYP=EX;

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

don't forget to resync EMG (MD110 support) after this command

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[major3838]

Many thanks for your Help.

The command is running fine.
But i've this response :
Number series already assigned !

Or in EMG, node "number series/voice extension" there is no such series.
I've looked for in every node, and i did not find any trace of the series i try to create.

How to get revelant information about already assigned series numbers ?


Thanks,
Philippe.

 

[whosrdaddy]

to see complete number plan :

NADAP;

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[major3838]

Thank you for your Help.

I've already type this command but no trace of the new series number i try to setting up ......

 

[whosrdaddy]

post your NADAP here and the wanted number range...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!