Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up 2 Public IP for IX workplace

Status
Not open for further replies.

makemetrend

Technical User
Jan 23, 2019
399
PH
Hi guys!

Just a quick question, in setting up for 2 public ip(redundancy)for IX workplace is it possible only just to add another ip in B1 interface? Or should I create another cert and enter those 2 Public IPs?
 
@derfloh - is it possible to generate 2 IP's in creating a different machine in port 7071?
 
@derfloh - do you mean in the Machine IP, can i put those 2 IP's in the Machine IP? For the SANS its not working for IP only for DNS
 
Yup. Theres no problem if I put DNS but when I put dns and IP I am having an error. I can still try tho.
 
I also got an error but it went away as soon as I entered the IP from the upper IP address field into the SANs field.

34A39591-46DE-4753-A664-81728F805843_ozeiav.jpg


IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
 
Copy that derfloh! Will try that too on monday! Many thanks!!
 
So when generating a cert for abce. In the machine IP it should be the public ip. And I will also put in the SANs the machine and the other public ip? Is that right?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top