SethuntGroupNightService from a remote office

[ccable]

I have an IPOffice 403 at our main location and an IpOffice SOE at our remote location. These are connected via T1 PtP. All calls come in at the main location and are handled by the receptionist there. Outside of business hours we set night mode with a button on the receptionist phone. Is there a way to set/unset night mode on the 403 unit from the remote site using a similar setup?

 

[Spanning]

Did you know the ip office has automatic night service.
Use a timeprofile to come on and off night service.

 

[big70]

Use phonemanager on the other side and dail a shortcode to put the huntgroup in nightservice.
Or an IP-station with a button programmed.

Greets Peter

 

[IPGuru]

or create a short code on site be that will route down your VoIP trunk to a short code on site a that activtes or deactivates night service

eg site b
sc 666
number .
line group ID 1 <Mvoip line>

site a
sc 666
number <group number>
feature SetHuntGroupNightService