Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Set up users and groups
- Thread starter bw2601
- Start date
Users and groups are set at the folder level via the Get Info command. Right click to get a menu or click on a folder once and go to File/Get Info.
Sharing is set in System Prefs/Sharing. You also have to check/uncheck some Firewall settings, depending on your setup.
Fax sharing is controlled by Printer Sharing in sharing in sys. prefs.
Sharing receive fases is controlld by system Prefs/Print & Fax/Faxing/Save to or you can use e-mail or both.
If you go to Help and search Sharing or Users & Groups you'll get pretty straightforward answers.
Sharing is set in System Prefs/Sharing. You also have to check/uncheck some Firewall settings, depending on your setup.
Fax sharing is controlled by Printer Sharing in sharing in sys. prefs.
Sharing receive fases is controlld by system Prefs/Print & Fax/Faxing/Save to or you can use e-mail or both.
If you go to Help and search Sharing or Users & Groups you'll get pretty straightforward answers.
- Status
Similar threads
