Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Set time on Avaya Merlin SP 34 Phone

Status
Not open for further replies.

tipandring70

Technical User
Oct 27, 2005
128
US
I have a Legend 6.0 with mostly MLX phones but a few "BIS" type sets.
One of those is a Avaya Merlin SP 34 Phone with a small display that has 4 buttons under the display.
Set, Start, Stop, and Time/timer. The date and time is way off on this set only.
Does anyone know the steps to change the date and time.
 
It's just a digital clock that uses power supplied by the control unit to run it, but it doesn't communicate with the control unit to get it's time setting. You need to use the Set button to get into the programming mode, the Fwd and Rev buttons to change the settings, and the Exit button when you are done.
 
Thanks TouchtoneTommy I pressed the set button until the time came up, then typed it the correct hour but could move to the minutes or date.
Maybe that is where the fwd and reverse buttons come in. I will try again next time I'm there
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top