Set Time in PBX ???

[manswar]

Hi Friends..

MY System Time and PBX time have 4 min difference.

I have changed time in LD 2

But still phones are showing old time that is 4 min diff.

Do i have to run any command on the system to change the time on phone sets to0...

Regards,
Sam

 

[Firebird Scrambler]

What release of software is your PABX?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[RickyPone]

And how long did you wait? If you want to see it straight away disable and enable the sets.

 

[nessman]

The bigger the system, the longer it takes for the time change to hit each phone.

 

[trentsteenholdt1]

It could be as well that your changing the time for the wrong zone. Some people have different zones for different handset, where realistically its just meant to be for sites and branch offices.

Trent Steenholdt

Systems Engineer
The University of Notre Dame Australia

-Great scott!