Set restriction override

[nsantin]

Hi, I've setup a restriction filter to block international calls for a specific ANALOG DN (conf phone), however im having issues with the override function.

Is it possible to setup an override or code that can be entered to allow calls to bypass the filter? The override appears to be allow only certain numbers that can be dialed. I'm trying to setup an extension that will allow a user to enter a code then dial any number they want.

I'm pretty sure I saw this done elsewhere, but I can;t recall how to set this up.

Thanks

 

[nsantin]

Ok, I've figure this out by using a COS password.

Only question is does anyone know how to do a F68 on an analog extension? (ATA2)

 

[biv343]

Should be just flash *68, then enter the COS code. You may need to fiddle with the flash timer on the ATA depending on what the phone is configured for. Seems the default (600ms) works most of the time, but you may need to tinker with it.

 

[nsantin]

Thanks Biv. Sometimes I just forget the basics!