Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

set relocation on 6X16

Status
Not open for further replies.

bxcbst

Technical User
Feb 1, 2008
7
US
does 6X16 have set relocation and if so wher do find it in programming
 
The 6x16 does have Set Relocation and I remember that it seemed to be enabled by default and couldn't be disabled (our 6x16 was DR1).

Newer versions however, may have the option of enabling / disabling it.
 
DR1 definitely has set relocation. I found out the hard way when a client decided to switch offices in the middle of an install. It can't be disabled on DR1. DR2 and up should be somewhere under Configuration/System data.

Brian Cox
 
I WOULDN'T LOOK FOR IT

OLD ROLMEN WORKING ON NORTELS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top