OldSchool70
Technical User
Is it possible to set the J Series phone's Ringer Volume so it Cannot be Adjusted by the user?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Set J Series Ringer Volume so it Cannot be Adjusted
- Thread starter OldSchool70
- Start date
#################### AUDIBLE ALERTING #######################
##
## Specifies the audible alerting setting for the telephone
## and whether users may change this setting.
##
## A value of 0 turns off audible alerting; user cannot
## adjust ringer volume at all.
## A value of 1 turns on audible alerting; user can adjust
## ringer volume but cannot turn off audible alerting.
## A value of 2 turns off audible alerting; user can adjust
## ringer volume and can turn off audible alerting.
## A value of 3 turns on audible alerting; user can adjust
## ringer volume and can turn off audible alerting.
##
## The default value is 3.
## SET AUDASYS 3
##
## NOTE: This AUDASYS value is applicable for 16xx phones starting with R1.3.
## Note: AUDASYS is not supported by J129 SIP R1.0.0.0/R1.1.0.0. Supported by J100 SIP R2.0.0.0 and later, J139 SIP R3.0.0.0 and later and J159 SIP R4.0.3.0 and later, J189 SIP R4.0.6.1 and later
## Note: This parameter is also supported by J169/J179 H.323 R6.7 and later, J159 and J189 H.323 R6.8.5 and later.
##
## Specifies the audible alerting setting for the telephone
## and whether users may change this setting.
##
## A value of 0 turns off audible alerting; user cannot
## adjust ringer volume at all.
## A value of 1 turns on audible alerting; user can adjust
## ringer volume but cannot turn off audible alerting.
## A value of 2 turns off audible alerting; user can adjust
## ringer volume and can turn off audible alerting.
## A value of 3 turns on audible alerting; user can adjust
## ringer volume and can turn off audible alerting.
##
## The default value is 3.
## SET AUDASYS 3
##
## NOTE: This AUDASYS value is applicable for 16xx phones starting with R1.3.
## Note: AUDASYS is not supported by J129 SIP R1.0.0.0/R1.1.0.0. Supported by J100 SIP R2.0.0.0 and later, J139 SIP R3.0.0.0 and later and J159 SIP R4.0.3.0 and later, J189 SIP R4.0.6.1 and later
## Note: This parameter is also supported by J169/J179 H.323 R6.7 and later, J159 and J189 H.323 R6.8.5 and later.
Similar threads
- Locked
- Question