Sessions 4.5 Upgrade 1

[undertaker48]

Hello All; I'm getting the software to upgrade to sessions 4.5, I'm at 25.40 now and I have a Nortel Meridian 1 61C PBX. What do I have to do to install the Sessions 4.5 on my PBX, can anyone give me step by step instructions on how to install sessions 4.5, or can you recommend a web site that could help me install Sessions 4.5, I would like to get a heads up on the installation before the software arrives. Also, any information on how set up and install IP phones for VOIP, or a web site, or online instruction videos would be great to, so I can get a heads up on this, so I will know what to do, when I start installing and setting up everything in the PBX, you guys have been life savers in the past, and you have a lot of information and experience,Thanks in advance for your help in this matter. Any help would be greatly appreciated.

Your Help Is Greatly Appreciated.
Thank You
Undertaker48

 

[KE407122]

Too many steps in the preparation and the Software Conversion Upgrade to detail here.

Just to go from 25.40 to 3.0 sometimes required equipment upgrade to your Motorola processor as the software was better suited for Pentium based and IP readiness.

The upgrade paths 3.0 to 4.5 were again too detailed to for this forum. You really should log into NORTEL for the paths.
There is a software only and a hardware/software path.

Without the pentium upgrade you won't be doing any IP set installations yet.

KE407122


When I find myself on the road less travelled, it just means I'm lost.