Session Manager

[hdbeavis]

I just implemented a Session Manager R6.1 with CM6.1 for SIP integration with a Rightfax Server. Calls from the PBX to the Rightfax are fine but calls out of the Right fax are not. The call comes out of the Session Manager and htis the PBX but instead of routing out the PSTN via the ARS table it ALWAYS goes to whatever is in route pattern 110. The call doesn't even look like it is setting up right. I have built a specific ARS Entry for the "called" number and pointed it to Route Pattern 270 but it always seems to go to whichever trunk is programmed into Route Pattern 110. It also will not let me do any kind of digit manipulation on the "inc-call-handling-trmt" table, it just ignores any entries. I have changed the trunk group in route pattern 110 and the call follows whatever is programmed. I have verified that their are no entries that conflict in any of the AAA, UDP or ARS tables. No clue what it is behaving like this. Here is an example of a normal call and one mentioned above, note that it doesn't show the normal call setup, routing info etc.:
Good Call
19:09:34 SIP>INVITE sip:85600@company.org SIP/2.0
19:09:34 Call-ID: 03ee469ad60e11d8414f21c92900
19:09:34 dial 85600 route:UDP|AAR
19:09:34 term trunk-group 18 cid 0x896
19:09:34 dial 85600 route:UDP|AAR
19:09:34 route-pattern 117 preference 1 location 1/ALL cid 0x896
19:09:34 seize trunk-group 18 member 3 cid 0x896
19:09:34 Setup digits 85600
19:09:34 Calling Number & Name 3035551212 NO-CPName

BAD CALL
19:05:54 SIP<INVITE sip:913035551212@company.org SIP/2.0
19:05:54 Call-ID: 78ad818-2a640f0a-13c4-55013-47ccd-5bf02c70-47c
19:05:54 cd
19:05:54 active trunk-group 18 member 7 cid 0x856
19:05:54 SIP>INVITE sip:913035551212@company.org SIP/2.0
19:05:54 Call-ID: 0e8c2e6ac60e1184414f21c92900
19:05:54 term trunk-group 110 cid 0x856
19:05:54 seize trunk-group 110 member 32 cid 0x856
19:05:54 Calling Number & Name NO-CPNumber NO-CPName

 

[redphone]

Try checking the Proxy Selection Route Pattern in the Locations form. From the command prompt, type change locations. Look in the far right column for route pattern 110.