Service Modes

[RYLSFAN]

Can some help me? I have a BCM50 2.0 that I want to set night service on. I have been setting these up for years on MICS and CICS and even a few successfull attempts on a couple BCM's (50 and 400's)

I have my control set to ext 271
I have ringing group one with only one member which is 395 (my vm dn)
I have set the scheduled services to manual

When i turn the night service on, the ringing pattern does not change. I have replaced the vm dn with an ext within my office to see if the service is working and the pattern does not change. All phone still ring.

Ext 271 will show night ringing in the display, however when you call it still takes 4 rings before the AA will answer.

Any ideas? TIA

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[MagnaRGP]

Do you have the trunks as memebers of the night service?

 

[RYLSFAN]

yes they are.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[DigitelD]

Make sure that the system is patched up. There was a problem with night service on the BCM50 2.0 and BCM 4.0.
For now, try rebooting the BCM and see if it starts working.

SHK Certified (School of Hard Knocks)

 

[RYLSFAN]

If anyone knows of this patch please fill me in.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[DigitelD]

It is the latest system patch. Nortel no longer has individual patches. It is the latest system patch.

SHK Certified (School of Hard Knocks)