How do i start a hung service<br> I tried to start it from the services manages<br><br> Please Help<br><br> <p>Unicorn11<br><a href=mailto:webmaster@tripmedia.com>webmaster@tripmedia.com</a><br><a href= > </a><br>Hi there it all likeminded fellows!!!!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Service hung problem
- Thread starter unicorn11
- Start date
have you recently changed your admin password???? That will cause problems starting services.<br><br>Or have you just stopped it, give it a shout pause before starting it again, espically if we are talking the spooler here.<br><br>Paul <p>Paul Ovey<br><a href=mailto
aul.ovey@avenue-legal.co.uk>paul.ovey@avenue-legal.co.uk</a><br><a href= > </a><br>
aul.ovey@avenue-legal.co.uk>paul.ovey@avenue-legal.co.uk</a><br><a href= > </a><br>- Thread starter
- #4
Well the problem was that the end point was not getting created and due to that till i have set it to retry to restarting the service it gets hung<br><br> I thought it was a problem with the rpc service because it is responsible for the creation of the end point and it was working perfectly<br><br> finally i found that i could not even connect to the net ie because my wingate client was missing the address of my wingate server so as soon as i added the ip of that server i found that i was able to start that service <br><br> does any body know what the connection between these two things are <br><br> regards <p>Unicorn11<br><a href=mailto:webmaster@tripmedia.com>webmaster@tripmedia.com</a><br><a href= > </a><br>Hi there it all likeminded fellows!!!!!!
- Status
Similar threads
- Locked
- Question